In addition, partition finishing is also considered as the processing process of floor materials, if

In addition, partition finishing is also considered as the processing process of floor materials, if Decorate the balcony with your own hands, step by step guidance and advice

Balconies and loggias are an integral part of many apartments and houses. Usually, the owners of residential real estate do not perform any maintenance work in these houses to save money, but this is considered a wrong decision. If you complete the step-by-step instructions for the balcony (as shown below) with your own hands correctly and effectively, you will get a mature living room that can be used for any purpose. Different materials can be used to decorate the structure, but the best solution is to use a special panel, which can be plastic, wood or other materials. The partition panel is an ideal choice because the material has a beautiful appearance and is environmentally friendly. High-quality repair work on the loggia or balcony ensures a beautiful, warm room.

In order to complete the work, a variety of materials can be used to ensure excellent work results. The following options are considered the most popular.
Decorating balconies and loggias with partitions is considered the best solution. This material is made of natural wood and also has a beautiful appearance. The photos of this design are very beautiful. The material is easy to use, but not cheap. Its installation involves not only improving the appearance of the balcony, but also other work related to the insulation of the room. The siding is available in a variety of colors. During the production process, it is equipped with special fasteners to ensure a simplified installation process.
Install it on the crate and seal all the resulting seams. It can be covered with wallpaper, paint or other decorative materials. This option does not require significant investment in the maintenance of the loggia. They are a good choice for balconies, but they do not have the required moisture permeability indicator, so air tightness can be achieved. They come in many colors, so you can get interesting and bright designs with their help. The above materials are considered the most relevant and are often used in the balcony renovation process. A long-lasting and beautiful coating can be obtained from it. Anyone without this experience can perform all the work in his creation. In most cases, the inner lining is used in the loggia to form a beautiful coating. It is easy to operate and is treated with special protective compounds under production conditions to prevent microbial rot or development. Photos of this finish are widely displayed in the selection, so you can be sure of the correct choice of cladding for the balcony surface. If you plan to carry out repair work independently on the balcony, it is important to understand all the details of how to install the coating. Step-by-step instructions introduce sequential operations with which you can independently create correct and high-quality designs. Initially, it is important to calculate the materials needed for the next step. For this reason, the size of the balcony itself and the size of the lining board or other selected materials should be considered. It is recommended to save a small amount of profit when purchasing a panel for the first time, because beginners may make mistakes and cause material damage, which greatly increases consumption.
Not only the panel itself, but also other materials that will be used in the work process. If the walls of the balcony are not flat, it is recommended to form a crate, for which high-quality and dry wooden slats are used. Particular attention should be paid to the purchase of fasteners. These fasteners should not damage the integrity of the lining, but must ensure the best and reliable fastening.
Since the walls of the balcony are covered with partitions, it is very important to prepare a jigsaw for cutting. You can also use a hacksaw.

In the process of cutting the lining, only goggles are needed to avoid contact with small and dangerous objects in the eyes. After the preservative is dry, apply the primer, you can use a roller, brush or sprayer. The description of the high-quality decoration that forms the balcony with the partition assumes a reliable frame. For him, the selected finishing materials will be further fixed. To create the frame, wooden beams are usually used, properly dried and selected high-quality elements. Their thickness depends entirely on the parameters of the panel selected for finishing. Consider whether to use insulation in the process of finishing the loggia, because it will affect the parameters of the lathe.
Before using any wooden materials (including wooden beams), it is important to cover them with high-quality preservatives to improve their moisture resistance. The most commonly used wood is used for fixing pins.

The photos of the finished slats are shown below, so it is easy to understand their structure and design. In addition, their parameters may be different, because they are completely dependent on the panels used, because balconies are not always finished with partitions. Usually, other materials are used for this, which are also fixed to the frame. After the frame is ready, it is not recommended to wrap it with partitions immediately, because it is hoped to fill the empty cells with insulation material, Lashawna appartement superpawn which will greatly increase the insulation parameters of the room. Decorative loggias usually require additional insulation. Since crates with empty cells are created, the selected insulation layer is placed in these cells. Due to the formation of an insulating layer, a warm room is formed. The best choice for loggias and balconies is produced in floor slabs. Mineral wool is also often used, but it is only allowed to be used in combination with a waterproof membrane, because it is important to not allow water to penetrate the insulating material, which will have a negative impact on the basic parameters of the insulating material. Similarly, interior decoration usually uses foam in the insulation process. However, considering that it has poor vapor barrier parameters. The insulating plate must be very tightly packed into the battery.

The insulating material is fixed by glue or foam, but different mechanical fasteners can be used for these purposes. The photo of the completed result can be viewed below. The step-by-step instructions assume that the next step in finishing the balcony with partitions is to cover the created frame with waterproof material. For these purposes, the most common choice is polyethylene film, which is considered affordable and easy to use. However, there are many types of modern membranes on the market, with the help of these membranes, excellent moisture protection can be provided to the structure. Their photos are selected, usually one side is foil. If the roof material is selected as the waterproof material, the material must be heated from the installation side before installation. If you plan to use polystyrene as an insulating material, you need to use plastic pins or toluene-free glue for fixing. The glue must be applied to the fastening area with a serrated trowel. For more reliable fixing, the pins are located on the edge of the board. The reliability of the seal will allow the additional use of sealing tape. In addition, don't forget to treat the surface of the frame with a special hydrophobic compound, and install low tide to prevent the water under the frame from entering. Interior decoration also involves the fastening of the panel itself. In most cases, you must use a partition, which is known for its excellent appearance, ease of use and other positive parameters. If it is necessary to cut the panel, you can use a special hacksaw to design it to match the specific material.
Therefore, decorating the walls of the balcony with lining is considered a simple and clear process that anyone can handle. In order to fully organize the loggia, please pay attention to the floor. High-quality floor coverings, decks, tiles, laminate or linoleum are considered excellent choices for balconies. It is important to determine materials that can withstand changes in temperature or high humidity. Each type has its own characteristics, so the choice depends on the purpose of the balcony and the expectations of the owner.
The final goal is to create high-quality and bright lighting. The photo of the final result is shown below. For the loggia, you can use not only the standard chandelier located in the center of the ceiling, but also spotlights and light strips.

Therefore, completing any balcony or loggia is a complex process involving the execution of a large number of actions. All of these are understandable and uncomplicated, so they can be performed individually.

Selected photos, you can choose to use various materials to organize the balcony.

If you use your own hands to trim the balcony, the step-by-step instructions are the same in most cases for different finish materials.
Describe the work you need to perform and compare with our prices! wedi | EN - Training: Building a complete bathroom using the wedi system