After the outline, the window will be used for double-glazed windows.

After the outline, the window will be used for double-glazed windows.
New Product-Tape- For a long time, plastic windows are no longer a mandatory attribute of the so-called European quality renovation project, but also an element of financial capability. Nowadays, windows and multi-room double-glazed windows are a priority, especially for noisy cities or cold climates. However, the installation of such windows is quite troublesome. Subtle flaws may lead to the fact that their direct function-preventing airflow, noise and dust-such a frame simply cannot do. However, if you are ready to strictly abide by all the rules for installing plastic windows and have confidence in your ability, then this material is for you. If you have the opportunity to choose the time to install the windows, it is best to do this process in a sufficiently warm season (preferably from May to September). However, for various reasons, it is North Utica knocklyon sfakianakis necessary to install windows even in the cold season (for example, when moving to a new apartment). There is only one rule: the air temperature must be at least -5 degrees Celsius, and all installation work must be carried out in dry weather. However, new windows should not be treated even under extreme heat-the consequences of such installation may be unpredictable.

Therefore, you decide to install new beautiful windows yourself. In this case, before ordering frames and double-glazed windows, the most important thing is to take all measurements absolutely accurately so that the results will not disappoint you, but will satisfy you. For this reason, it is necessary to carefully measure the opening of the window in which the new window is planned to be placed from the inside-the width from the bottom of the wall, not from the existing slope. If there is, it must be removed before measurement. Then, while considering what kind of window sills are installed in the house, we measure the height of the windows. If it can be deleted, the height from the bottom of the slab where the window should be placed should be considered. The next parameter is the depth of the opening. When making these measurements, consideration should also be given to the presence of removed elements, such as plaster, slats and strips of old windows. At this point, we have completed the internal measurement.

In the external dimensions of the window, you also need to be extra careful. Here, we deal with the same parameters-width, height and depth. Also, in this case, you need to consider the presence of removed parts, such as old plaster, cement or the edges of the bottom of the window. When making measurements, keep in mind that under the influence of temperature fluctuations, the window may shrink and expand. For this reason, proper space must be left in the window opening and its minimum size must be strictly restricted. At the opening of the window, but only a few centimeters. In other words, you need to maintain a distance of at least 4 between the edge of the glass unit and the window sash itself to form a slope. Therefore, it makes sense to sort the windows only after all the measurements are completed before considering the window edges and all details. Don't forget the accessories and all the necessary elements-handles, mosquito nets, fasteners for them, undulations and windowsills.

The box is troublesome and dirty because there will be a lot of dust. Therefore, it is worth at least covering all indoor objects in the room with film. However, the best option is if there is no furniture in the room, especially soft furniture. To remove old windows, you need a chisel, hammer, pry bar, hacksaw or jigsaw. Chisel and hammer can be replaced by hammer drill. First, we got rid of old windows or minimum size sashes. Then, we remove the large window sash. After that, it was the inner partition between the baffles-it had to be sawn open and then removed from the frame. Next, the lower part of the old frame-also use a hacksaw or jigsaw, and then remove the rest of the window. After removing the old frame, it is necessary to level the surface where the new window will be placed. To do this, you need to use a hole punch or chisel and hammer to cut off all irregularities, and to install a new window sill, you need to use the same tool to prepare a groove for the opening of the future window. To this end, we completely removed the debris and dust from the window holes. The fragile surface of the opening must be treated with a reinforced primer.

Special attention should be paid to the location of the sealing tape to ensure a firm fixation. For this purpose, special primers (primers) can be used. An important stage in preparing the window profile for installation is to comply with the requirements for protecting the assembly seams or installing the windows in accordance with the requirements. In Russia, where the temperature fluctuates greatly, even if windows are installed and used with the utmost care, there will be problems with condensation and fungi on the wall near the window opening. To avoid this problem, it is recommended to use moisture-proof belts and waterproof breathable belts. At this stage, before installing the window frame in the opening, on the inside of a quarter of the opening or on the outline of the frame, before it is adjacent to the quarter, it must be pasted (vapor-permeable self-expanding sealing tape) .

This will ensure an airtight abutment between the profile and the window opening. In order to ensure that the seams are sealed from the inside of the room, according to the manufacturer's recommendations, stick moisture-proof tape to the profile. It is recommended to use self-expanding tape to seal other components, expand and support contoured abutments.
Before starting to install a new window, one of the main points that should be determined is the fixing method. You may prefer window contours to anchors or mounting plates. Each of these methods has its own characteristics. Therefore, to make the right choice, you must consider the many nuances of the room. First, consider the material of the wall. In a brick wall or a panel wall, there is actually no difference in which fastening method is used. However, if you install windows in a building made of aerated concrete or foam blocks, you should definitely choose a mount on the mounting plate.
By the way, this is also the easiest way to fasten, even non-professionals can use it. At the same time, you will never have the size of a double-glazed window, and you can save a lot of time. However, there is still a shortcoming-the windows on the mounting plate may be due in part to the tight fitting of the fastening elements to each other. Since the mounting plate is connected by the profile instead of the profile, it acts like an anchor when drilling holes in the profile.
However, another method of fixing on the anchor has greater disadvantages. If this method is used, there is a great threat of pressure reduction in the new window chamber due to the need to drill through the profile. Therefore, the temperature balance inside the double-glazed room-from the coldest room on the street to the hottest room inside, can be disturbed.

Moreover, the fastening to the anchor requires certain professional knowledge of the installer, because a little error in the drilling of the profile will cause gaps, incomplete closing of the window sash, etc. However, this kind of accessory manufactured in accordance with all rules is more durable and ensures that there will be no vibration in strong winds. In addition, the possibility of the new window sinking is practically zero.
If necessary, two fixing methods can be used, but all methods mainly depend on the material of the wall from which the window is made. In any case, the first fastener should be located 13-16 cm from the inner corner of the profile. Then place all subsequent components 61-71 cm apart. At the same time, at least three fasteners must be made on each side of the profile. The arrangement of the fixing elements depends on the profile type, size and color of the window frame, and is adjusted by the requirements of.
Before starting the work at this stage, it is necessary to align the planes on all sides of the window opening-we will set the contour along them. The easiest way to check the surface is to use a level. In order for the profile to fit the opening perfectly, you need to insert it and align it vertically, placing a polymer mounting wedge or anticorrosive hardwood strip under it. We make this adjustment strictly from the top of the window.

The final fixation should only be carried out after the window is sure to fall evenly at the opening. If you connect the profile to the mounting plate, first use a nail to fix one of them. Only after you have ensured that the profile is absolutely uniform, can you use the second blocking nail. If you prefer to use anchors, please do not rush to tighten the holes through the holes in the fastening profiles after drilling holes in the wall. Make sure that the window is horizontal first. Even if everything is normal in this respect, the anchor should be tightened very slowly to ensure that the profile does not protrude and its geometry is not disturbed.
In both cases, the wooden wedges that hold the profile in the window opening should be removed only after it is finally secured with fasteners. In addition, we first remove the wedges from above and then from the side of the window. The lower ones should be kept in the configuration file because they are actually its basis. During this work phase, you will need all the same moisture-proof tape and self-tapping screws, and also added mounting foam. Similarly, the most important thing is to correctly measure the future ebb tide, we use metal scissors for fitting. The breathable waterproof tape must be pasted on the bottom of the profile to prevent the seam between the window and the wall from ebbing from below. In order to make the landing gear soundproof, butyl tape can be attached to its lower part, or the tape can be installed along the outer edge in the form of support between the landing gear and the lower part of the opening. It must be connected to the profile using self-tapping screws; first, there must be undulations in the corresponding grooves of the window.
In order to seal the assembly joints, please use special foam to install the windows and minimize secondary expansion to avoid possible deformation of the window frame during the polymerization process. First, we deal with the joints between the wall and the profile on the left, and then on the right. We completed the seam processing along the top and bottom of the window. Beforehand, the wall surface needs to be slightly wetted. A few minutes later, when the foam expanded and started the polymerization process, we glued the second part of the protective moisture barrier to the wall around the entire perimeter of the window on top of it.
We enter one of the final stages of editing. First, you need to remove the protective film from the inside of the window. Then, with the help of special linings, we installed double-glazed windows to ensure they fit the opening evenly. You can use fixing bars hammered into the window grooves to fix the glass unit. For this it is convenient to use a rubber hammer.
Only in this way can we install the window sash on the awning. And after fixing the handle, it is necessary toadjust the window sash in the horizontal and vertical directions. Only after that, if necessary, we install mosquito nets.
This stage largely determines how your work will look and how comfortable using the new window will be for you. In this case, the window sill should not completely isolate the hot air in the battery from the window itself. Look, this will be his foundation. It should be noted that the window sill should be pressed as tightly as possible on the window from below, and the angle of inclination towards the room should not exceed 5 degrees. Before treating the bottom of the window sill with foam, it is very important to check that it is in place. If you have done everything correctly, there is no need to apply any other fastening methods at all. To temporarily fix it in the opening of the window glass while drying the installation foam, you can add a load on the window sill, such as a 5 liter water bottle. Weatherall double glazed windows